Search This Blog

Tuesday, January 30, 2018

DBS Right Issues & Smart Money

Introduction
DBS halted trading on 22 December 2008 to announce that it would offer rights issue at a one-for-two ratio. This right issues can be traded in the open market in the SGX between 6 Jan to 14 Jan 2009 and must be converted to ordinary share by paying $ 5.42 per right issue before 20 Jan 2008.

A day before the announcement, i.e. 21 December 2008, DBS closed @ 8.37 per share; but when the trading halt was lifted on 22 December, the share price opened at a low of $ 7.74 and closed @ 8.05 per share. Thereafter, the share was traded up to a high of $ 9.56 on 6 Jan 2009 and subsequently to a high of another new high of $ 10.38 before it was dumped to a low of $ 8.40 last Friday on rumours that DBS has "breached" a loan contract in Middle East amounting to $ 3.0 bln.


What's the Actual Price?

To work out the actual price of DBS's share, one must gastimate the trading price of the DBS's share after 2nd February, when the right issue is converted to oridinary share in SGX. If one were to assume that one DBS share would worth $ 10/= after 2nd February, then today's price must be

=(2x10+5.42)/3 or around $ 8.47/= . Note that DBS's price has been pushed up to a high of $ 10.38 or someone was of the view that DBS should be traded around $ 13/=, which appeared to be on the higher side.


What had happened?

Smart Money could be at play here. One theory is that they have pumped up the price of mother share to sell their rights at higher price and thereafter, dumped the mother share so that they can accumulate again at a lower price.


How Do We Know?

Smart Money are being played by Big Boys who know how to manipulate the market and to spread rumours for gains. Jim Cramer admitted that he practiced it although it was quite legal to do so. TradeGuider tracked what happened and showed how one can avoid being sucked into such manipulation and gain from it.


Transaction Volume

TradeGuider believes that one can track and follow Smart Money and know where the Smart Money will flow and make money from it. He pointed out the tracking the volume of transaction and the high and low price will tell tales.


Accumulation/Distribution Indicator

The Accumulation/Distribution Indicator (AD), developed by Marc Chaikin did exactly what TraderGuide has said. He used the following simple formula:


( ( (C - L) - (H - C) ) / (H - L) )* V


Where C =Close price

L= Low price

H= High price

V=Volume of transaction


The signals for the AD are quite simple:


Bullish: when there is a positive divergence or when AD moves higher while the stock is declining.

Bearish: when there is a negative divergence or when the AD moves lower while the stock is rising.


Tracking Smart Money in DBS Counter





ng together. However, the stock finally caught up with the Accumulation/Distribution Line when it broke resistance in November.
Another means of using the Accumulation/Distribution Line is to confirm the strength or sustainability behind an advance. In a healthy advance, the Accumulation/Distribution Line should keep up or, at the very least, move in an uptrend. If the stock is moving up at a rapid clip, but the Accumulation/Distribution Line has trouble making higher highs or trades sideways, it should serve as an indication that buying pressure is relatively weak.

Wal-Mart Stores (WMT) began a sharp advance in August that was accompanied by an equally strong move in the Accumulation/Distribution Line. In fact, the Accumulation/Distribution Line was stronger than the stock in early September. After a bit of a consolidation, both again started higher and recorded new reaction highs in early October. Volume flows were behind this advance from the very beginning and continued throughout. The stock ended up advancing from 40 to 60 in about 3 months. Interestingly, as of this writing (December 1999) the Accumulation/Distribution Line has started to move sideways and is indicating that buying pressure is beginning to wane.
Bearish Signals
The same principles that apply to positive divergences apply to negative divergences. The key issue is to identify the main trend in the Accumulation/Distribution Line and compare it to the underlying security. Young negative divergences, or those that are relatively flat, should be looked upon with a healthy dose of skepticism.
The Wal-Mart chart shows a relatively flat negative divergence that is just over a month old. This negative divergence has yet to make a lower low, and should probably be given a little more time to mature. The relative weakness in the Accumulation/Distribution Line should serve as a sign that buying pressure is diminishing while the stock remains at lofty



If the stock closes on the high, the top of the range, then the value would be plus one.
If the stock closes above the midpoint of the high-low range, but below the high, then the value would be between zero and one.
If the stock closes exactly halfway between the high and the low, then the value would be zero.
If the stock closes below the midpoint of the high-low range, but above the low, then the value would be negative.
If the stock closes on the low, the absolute bottom of the range, then the value would be minus one.
The CLV is then multiplied by the corresponding period's volume, and the cumulative total forms the Accumulation/Distribution Line.




share can be traded between 6 Jan and 14 Jan 2009 in the open market at the SGX.

. Basically this system caters for 3 types of people:a. Those who are already shareholders at XR and do not want to pay for the rights. The thing goes like this, whether you want it or not, you'll be given the nil paid rights. If you want to subscribe to it, you can do so by accepting it and paying for it before 20th Jan 2009 (last date for acceptance). You can even subscribe to excess rights beyond what is entitled to you too, but it might not be successful. For those who do not want the nil-paid rights (i.e. do not want to accept the rights shares and pay for it), you can sell it in the open market. The last date of trading for the nil paid rights is 14th Jan, 2009. Which brings us to the next category...b. For those shareholders who want to make sure they can get excess rights shares without bidding for it (and thus subjecting to chance), they can also buy the nil paid rights direct from the open market. Of course, if you subscribe to excess rights and bid for a chance to get it, you'll only pay $5.42 for each right. But if you buy from the open market, you have to pay the market price of the right PLUS a fixed $5.42. Might not be so cheap.c. Those who are not DBS shareholders at XR but want to buy the nil paid rights at open market. Basically these arbitrageurs will look for opportunities to buy the rights cheaply, waiting for the nil-paid rights to become ordinary shares on 2nd Feb 2009, then profit (or lose) the difference.However, do not be mistaken that the nil paid rights will be trading at the rights issue price of $5.42. If we take the post-rights price of DBS to be $8.37 (as mentioned in the announcement), then the nil paid rights should be trading at around $2.95 range (8.37 - 5.42 = 2.95). DO NOT assume that it's cheap - it might not be!For example, if we buy the nil paid rights off the market at $2.90 per share (this varies according to market forces), then pay another $5.42 per share (this is fixed) to convert it to ordinary shares, our cost of each new share of DBS will be $8.32. There's no brokerage involved so that is truly our cost. If after the new shares commence trading on 2nd Feb 2009 at a price of $8.37, we basically earn $0.05 per share (8.37 - 8.32 = 0.05) excluding brokerage involved in selling. To succeed in this arbritrage opportunity, we have to guesstimate the price of DBS on 2nd Feb, then minus off 5.42. Any price lower than that is a good bargain, pre brokerage charge.3. The theoretical post-rights price of DBS on 2nd Feb 2009If you've been in the market for long, you'll realise that 'by right', the price can be this and that, but 'by left', all is not right. Oh well, in theory, because DBS is offering 1 new shares for every 2 existing shares, they are going to dilute their earnings and dividends by a factor of 2/3, which is quite substantial for those who are shareholders but chose not to subscribe for the rights. This means that if the earnings is say $3 per share pre-rights, the new earnings will be $2 per share post-rights. Dividends yield too, if their dividend yield per annum is say 6%, the new dividend yield will be 4%. Ouch.Anyway, here's how to calculate the new share price of DBS when the rights shares commence trading on 2nd Feb. Today, DBS closed at $9.37, so let's use this price. The formula is:New share price of DBS = (2 x 9.37 + 5.42) / 3If we take DBS's closing price to be 9.85, then using the calculation, we end up with the post rights share price of DBS at 8.37 per share. However, do take note that the actual price will be swayed by more than just mathematical calculations, hence it might not be what is calculated. Be aware of the risk of arbitraging!There's a whole lot more details that I missed out, so for those who wished to find out more, do visit my newbie's FAQ. Alternatively, you can visit the same version in this blog over here.Now I worry about HSBC's possible capital injection through rights too. Will I be able to subscribe to it because I'm a foreign investor?

Sunday, January 28, 2018

High CPU Temperature in AC Ryan 4K UHD Media Player

28 January 2018

The Media Play is AC Ryan VEOLO ACR-VE94000 4K UHD Media Player . It is still available in Q0010 for about $99/= but I bought this second hand set for $40/= in Carousel but it has a CPU heating problem running as high as 80 0C. This article outline a method where one could resolve this CPU heating problem in AC Ryan Media Player. 



What could be the Reason?

There are many reasons and one of the them must be poor heat dissipation.  When CPU temperature went beyond the set temperature,  it cuts itself off  to protect the CPU.  



The Construction


The set has a Quad-Core CPU (Cortex-A17 SoC) with a ARM Mali-T764 GPU, 2GB DDR3 RAM and 16GB Flash memory.  Its maximum operating temperature is around 70 0C.  

The CPU has a small heat sink no larger than 35x35 mm as shown in the attached.  It has also a metal plate of around 100x40mm attached by 2 screws on the casing.   The metal plate is offsetted slightly from the CPU heat sink,  providing an air gap of about 5mm between the CPU and the metal plate.  The exact reason for this strange set up is unknown.



What Could Be Wrong?  And the Solution

The heat sink was found firmly attached to the CPU by thermal glue.   It could only be removed by heating to inspect the condition.    Repacking the CPU with new thermal glue would be the solution;  instead,  a piece of alumimum sheet was inserted in between the 100x40 metal plate and the CPU as shown with 2 purposes

1.      To provide a direct thermal contact between the CPU and the 100x40 mm metal;

2.      To apply some pressure to the CPU heat sink hopefully to reduce the gap if any between the CPU and the heat sink

The modification appeared to be successful as the CPU temperature was reduced from the original 80 0C to around 55 0C after the piece of aluminum sheet was inserted. The casing took sometime to assemble as some force was required to force-fit the alumimum sheet so that it could be “moulded” properly onto the CPU’s heat sink.

 

 Update:  8 Feb 2018 

Have extended the sheet of aluminum to also cover all the tops of the COU heat sink and added a piece of thermal pad in between the aluminum sheet and the heat sink to further improve the heat transfer.

 

 

 

 

Thursday, January 25, 2018

Install Youtube and Google Chrome in Xiaomi TV without rooting



21 January 2018

Xiaomi TVs made in China are one of the cheapest in the market.  A 4K 55” TV will cost around $900 to $950 depending on the bargains.   However,  the original Xiaomi TV come with all Chinese characters and does not equip with Youtube and Google Chrome unless one is prepared to root the TV.   This article will show how one can install the appropriate software to a unrooted Xiaomi TV

1)      Change the display language from Chinese to English
2)      Install Youtube and Google Chrome

What are needed?

 1)      The appropriate installation software or APKs for Xiaomi TV


                  a)      Open Hidden Setting APK  (download here or here )
b)      Google Chrome  (download here)
c)      Youtube (download here or here)  (Note:  Only Youtube for Andriod TV can be used)

2)      USB thumb drive

Step by Step 

A)      To Change Display Language from Chinese to English

  1. Download the appropriate APKs to a USB thumb drive;
  2. Insert thumb drive to one of the USB port at the back of the TV
  3. Switch on the TV and the TV should come up with this screen automatically;



  1. If not,  navigate to the "Apps Store" page and select “高清播放器 or “Video Player”   in English



  1. and then select “设备“ or  “Device” on the  top left hand corner to reveal the following page,  then select  ”移动存储设备“ to select the “Open Hidden Setting” APK  from the thumb drive to load and install the program

 
  1. Open up “Open Hidden Setting” and on this page,  select “语言和输入法“ or “language and input” to change the language from Chinese to English
   

B)      To Install Google Chrome and Youtube

Follow step A1 to A5 to install the correct Google Chrome and Youtube.   Note that other version of Google Chrome and Youtube may not work reliably.

Update:  14 Feb 2018

 One could also use other versions of Youtube and Google Chrome designed for ARM16 Andriod TVs;  for example,  the following version appears to run stable for Xiaomi TV4

a)   com.google.android.youtube.tv_2.02.08 or here
b)   Chrome_63.0.3239.111.apk

Other Articles About Xiaomi TV or Box 

Can be found here

Reference:

1. Backup APKs in Xiaomi TV
2. The Sacred Screen  Controller or TV Assistant
3. Xiaomi TV:  Factory Reset and Recovery
4. Xiaomi TV:  To root or not to root

Tiny Url : https://tinyurl.com/y7tgn85b

Thursday, January 18, 2018

How To Backup APKs in Xiaomi TV (小米电视)

18 January 2018 
https://tinyurl.com/y925zm63 


 
Introduction

Xiaomi TV is a very popular Chinese made TV.  It is one of the cheapest TV that is packed with lots of Chinese serials and Television programs.   One of the problems with Xiaomi TV is the lack of  technical support in English and also,  it does not support Youtube and other Google services unless one is prepared to root the device and void the warranty.   Therefore, backing up all the APKs to external devices becomes a challenge in an unrooted TV.   This article will deal with one method where one can back up all the APKs to the local drive or network or cloud  drives such as google drive,  dropbox etc without rooting the TV. 

What’s Required?


1.  esexplorer APK for Andriod TV (download link)

2.  USB mouse
3.  USB thumb drive

It is assumed that the Xiaomi TV is already connected to a Network and a computer PC is available to download the APKs to a thumb drive for the APK to be installed to the TV.

Setup


a)  Open Google Drive,  select APK and save it to internal storage


      1. Download  esexplorer APK to a USB stick and install the APK 

      2.  Start up esexplorer from the TV's Apps store and navigate to this home screen







3.  Find the Network Menu on the left panel and click the “Cloud” to reveal the following screen




  1. Select "Gdrive" and the following familiar screen will appear to prompt for google username and password
   
  1. Proceed back to the "Home screen" and click App to show all the Apps stored in the TV;  then  click and hold the icon until a tick appears.   To select all icons,  click the Select All button at the top right hand corner.  After that, click Backup at the bottom to save the APKs to the internal storage。







 b)      Transfer APKs from internal storage to Google Drive


1)  Click the “Local” on the left hand menu to bring up the following local screen.  and then click “backups” folder to show all the backed up APKs in the internal storage。






  1. Select one or all the APKs and click “more” at the bottom right hand corner to bring up the side manual as shown

  
  1. Click “Move to” and the following screen will appear




  1. Click “/storage/emulated/0” and after that,  select “Gdrive” and the appropriate folder to move all the APKs to the Google Drive as shown.



Other Articles About Xiaomi TV or Box 

Can be found here

Tinyurl :   https://tinyurl.com/ycpm2tcl

Reference:

1.  Install Google Chrume and Youtube without rooting

Simple and Easy Way To Backup Photos, Movies and Documents from handphones

 2 December 2023 In the past,  we used iTunes when we wanted to transfer or backup our photos,  movies, and documents from iPhones or Androi...